Two way radio

Esc Motor Car 10a Brushed Dos Vias Rc Pwm Radio. Description: Function: forward, reverse, no brake Voltage: 3.0V---9.4V Signal: PPM Frequency: 2KHz Output currents: 20A, 30 seconds 25A, 5 seconds 50A; 80A peak UBEC output voltage: 5.7V Size: approx. 40 x 19 x 10mm/1.57 x 0.75 x 0.39 inch Incluye: 1x RC Car No Brake 10A Brushed ESC Two Way Motor Speed Controller

The La Grange pedal is designed to emulate the famous British Plexi amplifiers from the mid 60s. The wide variety of controls and switches, give you decades of legendary plexi tones, all the way up to the era of the modded amps from the late 80s and throughout the 90s.An independent boost function, with a level control, can be activated via its own foot-switch to be either used as a stand alone boost, or together with the La Granges main circuitry. Essentially two independent pedals, with the boost being in series after the La Grange!Reinhold designed the La Grange pedal with an op-amp input, followed by five discrete Class A gain stages and incorporated Germanium diode clipping. This approach minimizes the input noise floor while retaining touch sensitivity and clarity throughout the entire gain range.The La Grange pedal is powered by a standard 9V battery or 9VDC power supply. Reinholds advanced circuitry internally elevates the voltage to a substantially higher level. The higher voltage provides a greater dynamic range which closely resembles the feel of a real amplifier; therefore running the pedal above 9VDC will not improve dynamics and it is not recommended!Features:True bypassIndependent boost with level controlMaster Controls: volume, tone, channel blend and gain controlsChannel Blend simulates the two channels of a four input 67-69 plexi amplifier3 position gain switch for low (plexi), medium (normal) and high (modded) gain structureVariac mode for brown sound, added dynamic compression with enhanced harmonics2 position presence switch for overall brightness3 position structure switch for a tight focused, fat loose or in between sound and feelJacks: input, output and exp. for foot controllable gain via the output of a volume pedal.

Hpi Racing Suspension Arm Set: Mt2 Only - 85074. A LA VENTA REPUESTO DE LOS BRAZOS DE LA SUSPENSIÓN PARA LOS COCHES A ESCALA CONTROLADOS A RADIO CONTROL DESCRIPCION: This is a replacement HPI Suspension Arm Set. These arms can be used on the front or rear of the truck, and are only compatible with the RS4 MT2. Package includes two suspension arms and two axle hexes. MODELOS COMPATIBLES: HPI RS4 MT