Microphone shure

Vendo MICROPHONE SHURE M58 USADO, EN BUEN ESTADO, MOLEDO: ULX1m1 662 Sin modulo. ES PARA MODULO DIGITAL

Shure GLXD2  System Wireless Transmission Digital 2.4 GHz Max Operating Range 200' / 61 m Latency 4.3 to 7.3 ms Encryption None Modulation Proprietary Transmitter Form Factor Handheld RF Output Power 10 mW Audio I/O None Gain Range -18 to +42 dB (1 dB Steps) Frequency Response 20 Hz to 20 kHz (Dependent on Mic) Sync Method Proprietary Antenna Internal (Handheld) Power Requirements Battery Battery Type 1 x Shure SB902 (Included, Replaceable) Battery Charging Time.25 to 3 Hours Approx. Battery Life 16 Hours USB/Lightning Connectivity 1 x Micro-USB Display & Indicators LED (Battery Status, Sync) Housing Plastic Operating Temperature 0 to 135°F / -17 to 57°C Storage Temperature -20 to 165°F / -28 to 73°C Dimensions 2 x 9.9" / 51 x 252 mm Weight 7.8 oz / 221 g (without Batteries) Microphone Form Factor Handheld Color Black Sound Field Mono Operating Principle Pressure Gradient Capsule Dynamic Polar Pattern Supercardioid Frequency Range 50 Hz to 16 kHz SNR 70.5 dB Equivalent Noise Level 23.5 dB A-Weighted Maximum SPL 147 dB SPL THD 0.25% Sensitivity -51.5 dBV/Pa at 1 kHz Length 9.92" / 252 mm Diameter 2.01" / 51 mm Weight 7.8 oz / 221 g

Shure PGA-181 Specs Microphone Capsule Electret Condenser Polar Pattern Cardioid Performance Frequency Range 50 Hz to 20 kHz Maximum SPL 138 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) Impedance 120 Ohms Sensitivity 38 dBV/Pa at 1 kHz (Open Circuit Voltage) 12.7 mV/Pa at 1 kHz (Open Circuit Voltage) Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Power Operating Voltage 48 V (Phantom Power) Operating Current Consumption 2.0 mA Physical Construction Material Die-Cast Zinc Weight 13.5 oz / 383 g

Shure KSM44A Specs Microphone Operating Principle Pressure Gradient Capsule Condenser Diaphragm 1" / 25.40 mm Polar Pattern Cardioid, Figure-8, Omnidirectional Pattern Selection Switched Pad -15 dB High-Pass Filter 115 Hz, 6 dB/Octave 80 Hz, 18 dB/Octave Performance Frequency Range 20 Hz to 20 kHz Maximum SPL Cardioid: 134 dB SPL Omnidirectional: 140 dB SPL Figure-8: 139 dB SPL Impedance 50 Ohms Sensitivity Cardioid: 29.8 mV/Pa at 1 kHz Omnidirectional: 14.8 mV/Pa at 1 kHz Figure-8: 16.8 mV/Pa at 1 kHz Dynamic Range Cardioid: 130 dB Omnidirectional: 134 dB Figure-8: 131 dB Signal-to-Noise Ratio Cardioid: 90 dB Omnidirectional: 88 dB Figure-8: 86.5 dB Equivalent Noise Level Cardioid: 4 dB A-Weighted Omnidirectional: 6 dB A-Weighted Figure-8: 7.5 dB A-Weighted THD 1% Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Power Operating Voltage 48 V ± 4 V Operating Current Consumption 5.8 µA Physical Weight 17.35 oz / 492 g

Shure SV100 Specs Transducer Dynamic Polar Pattern Cardioid Frequency Response 50 Hz to 15 kHz Impedance 600 Ohms Sensitivity -52 dBV/Pa at 1 kHz Connector XLR Cable Type XLR to 1/4" Cable Length 15' / 4.6 m

Shure BLX188/CVL Specs System Wireless Transmission Analog UHF Number of RF Channels 123 Included Transmitters 2 x Bodypack Diversity Antenna Diversity RF Frequency Band H10: 542 to 572 MHz RF Bandwidth 24 MHz RF Channel Scanning Auto-Scan Max Operating Range 300' / 91.4 m (Line of Sight) Max Systems per Setup 12 Dynamic Range 100 dBA Receiver Form Factor Tabletop Antenna 2 x Internal, Fixed Number of Audio Channels 2 Audio I/O 2 x XLR 3-Pin Male Balanced Output 2 x 1/4" TRS Female Unbalanced Output Audio Output Level XLR Outputs: -27 dBV (Mic Level) 1/4" Outputs: -13 dBV (Instrument Level) Frequency Response 50 Hz to 15 kHz (Dependent on Mic) Impedance XLR Outputs: 200 Ohms 1/4" Outputs: 50 Ohms Adjacent Channel Isolation >50 dB Power Requirements AC/DC Power Adapter AC/DC Power Adapter 12 to 15 VDC at 160 mA, Center-Positive (Included) AC Input Power 100 to 240 VAC, 50 / 60 Hz at 150 mA Display & Indicators 2 x Multi-Segment LED (Channel, Group) 4 x LED (AF Level, Sync) Housing ABS Operating Temperature 0 to 135°F / -17 to 57°C Dimensions 15.3 x 1.6 x 4.6" / 388 x 40 x 116 mm Weight 15.1 oz / 429 g Transmitter Form Factor Bodypack RF Output Power 10 mW Audio I/O 1 x TA4/Mini XLR 4-Pin Male Input (Lockable) Muting Off/On Switch Auto-Level Control No Gain Range -16 to +10 dB Sync Method Manual Antenna 1 x Flexible Whip, Fixed (Beltpack) Power Requirements Battery Battery Type 2 x AA (Included) Approx. Battery Life 14 Hours (Alkaline) Display & Indicators 1 x Multi-Segment LED (Channel, Group) 1 x LED (Battery Status, Power) Housing ABS Dimensions 2.5 x 4.3 x 0.8" / 64 x 110 x 21 mm Weight 2.6 oz / 75 g (without Batteries) Microphone Form Factor Lavalier Sound Field Mono Capsule Electret Condenser Polar Pattern Cardioid Frequency Range 50 Hz to 20 kHz SNR 72 dB Equivalent Noise Level 22 dB A-Weighted Maximum SPL 139 dB SPL Impedance 600 Ohms Dynamic Range 117 dB Output Connectors 1 x TA4/Mini XLR 4-Pin Female Unbalanced (Lockable) Cable Length 4.27' / 1.3 m Operating Voltage 5 V Weight 0.88 oz / 25 g

Shure CVG18D-B/C Specs Microphone Capsule Electret Condenser Polar Pattern Cardioid Performance Frequency Range 70 Hz to 16 kHz Maximum SPL 120 dB SPL (1 kHz, 1% THD) Impedance 180 Ohms Sensitivity -33 dBV/Pa at 1 kHz 22 mV/Pa at 1 kHz Dynamic Range 93 dB Signal-to-Noise Ratio 67 dB (at 1 Pa/94 dB SPL) Equivalent Noise Level 27 dB SPL A-Weighted (Typical) CMRR 45 dB Power Operating Voltage 11 to 52 V Operating Current Consumption 2.0 mA Physical Operating Temperature 0 to 135°F / -18 to 57°C Operating Humidity 0 to 95% Storage Temperature -20 to 165°F / -29 to 74°C

Shure BLX288/PG58 Specs System Wireless Transmission Analog UHF Number of RF Channels 123 Included Transmitters 2 x Handheld Diversity Antenna Diversity RF Frequency Band H10: 542 to 572 MHz RF Bandwidth 24 MHz RF Channel Scanning Auto-Scan Max Operating Range 300' / 91.4 m (Line of Sight) Max Systems per Setup 12 Dynamic Range 100 dBA Receiver Form Factor Tabletop Mounting Options Tabletop Antenna 2 x Internal Number of Audio Channels 2 Audio I/O 2 x XLR 3-Pin Male Balanced Output 2 x 1/4" TS Female Unbalanced Output Audio Output Level XLR Outputs: -27 dBV (Mic Level) 1/4" Outputs: -13 dBV (Instrument Level) Frequency Response 50 Hz to 15 kHz (Dependent on Mic) Impedance XLR Outputs: 200 Ohms 1/4" Outputs: 50 Ohms Power Requirements AC/DC Power Adapter AC/DC Power Adapter 12 to 15 VDC at 160 mA, Center-Positive (Included) AC Input Power 100 to 240 VAC, 50 / 60 Hz Display & Indicators 2 x Multi-Segment LED (Channel, Group) 4 x LED (AF Level, Sync) Housing ABS Operating Temperature 0 to 135°F / -17 to 57°C Dimensions 15.3 x 1.6 x 4.6" / 388 x 40 x 116 mm Weight 15.1 oz / 429 g Transmitter Form Factor Handheld RF Output Power 10 mW Audio I/O None Muting Off/On Switch Auto-Level Control No Gain Range -20 to -10 dB Sync Method Manual Antenna 1 x Internal (Handheld) Power Requirements Battery Battery Type 2 x AA (Included) Approx. Battery Life 14 Hours (Alkaline) Display & Indicators 1 x Multi-Segment LED (Channel, Group) 1 x LED (Battery Status, Power) Housing ABS Dimensions 2.5 x 4.3 x 0.8" / 64 x 110 x 21 mm Weight 7.7 oz / 218 g (without Batteries) Microphone Form Factor Handheld Capsule Sound Field Mono Capsule Dynamic Polar Pattern Cardioid Frequency Range 50 Hz to 16 kHz Sensitivity -55 dBV/Pa at 1 kHz

Shure SV200 Specs Transducer Dynamic Polar Pattern Cardioid Frequency Response 50 Hz - 15 kHz Power Requirements None, Dynamic Transducer Output Impedance 600 ohms Output Connectors XLR - 15' (4.57 m) XLR cable included Weight 0.54 lb (244 g)

Shure Beta52A Specs Microphone Form Factor Stand/Boom Mount Sound Field Mono Capsule Dynamic Polar Pattern Supercardioid Orientation End Address High-Pass Filter None Tone Adjustment None Indicators None On-Board Controls None Windscreen None Performance Frequency Range 20 Hz to 10 kHz Maximum SPL 174 dB SPL Impedance 150 Ohms Sensitivity -64 dBV/Pa Connectivity Output Connectors (Analog) 1 x XLR 3-Pin (on Mic) Physical Mounting 5/8"-27 Female (via Integrated Hardware) Construction Material Metal, Steel Wire Grille Dimensions ø: 3.75 x H: 6.41L: 4.45" / ø: 95.25 x H: 162.81L: 113.03 mm Weight 21.6 oz / 605 g

Cinco entradas de nivel aux balanceadas (conectores RCA) Medidor de salida LED de pico Una salida de nivel auxiliar desequilibrada (conector Phono) Conector del cable de alimentación IEC 12V de alimentación phantom para micrófonos de condensador

"Audio-Technica kpdrums Microphone Kit" en su caja, sin uso para que los estrenes, EXCELENTE equipo con el prestigio de AUDIO TECHNICA, para percusiones mejor que RODE, Neumann, Electro-Voice y Shure. Vienen en su estuche original protector de plástico. Observen las fotos originales del equipo. Todo excelente. Son cuatro micrófonos así que es Buenísima oferta porque estarías comprando cada micrófono en menos de mil pesos y además con su estuche. Las fotos son del producto. Podrás ver su estado perfecto. Además conservado fuera de ambientes húmedos o polvosos que dañan la sensibilidad de los micrófonos. Cuatro micrófonos de tambor dinámicos cardioides diseñados de modo personalizado Construcción totalmente metálica lista para usar Diseño al estilo de percusión de perfil bajo Soporte para pedestal ajustable incorporado Cada KitPak de los KP-DRUMS incluye dos micrófonos de SNARE/TOM, dos micrófonos de KICK/TOM, un estuche de transporte duradero, Especificaciones Microphones Elemento Dinámico Patrón Polar Cardioide Respuesta en Frecuencia SNARE/TOM: 100-12.000 Hz KICK/TOM: 60-12.000 Hz Sensibilidad de Circuito Abierto SNARE/TOM: -58 dB (1,2 mV) re 1V a 1 Pa KICK/TOM: -59 dB (1,1 mV) re 1V a 1 Pa Peso SNARE/TOM: 324 g (11,4 oz) KICK/TOM: 317 g (11,2 oz) Dimensiones SNARE/TOM: 113,2 mm (4,46") de largo, 41,5 mm (1,63") de diámetro máximo KICK/TOM: 116,5 mm (4,59") de largo, 53,5 mm (2,11") de diámetro máximo Conector de Salida Integral de 3 pines tipo XLRM Accesorios Incluidos Estuche de transporte duradero; clave de tambor extra